首页 > 产品中心 > SINOMA装备平台 > 提升机
提升机
钢丝胶带提升机
钢丝胶带提升机
Steel Cord Reinforced Rubber Belt Elevator
公司 TBD 系列钢丝胶带提升机适用于提升生料、水泥等散装物料。
SINOMA-TCDRI TBD series belt bucket elevator is used for elevating bulk materials such as raw mill and cement.
 
结构特点:
头、尾滚筒采用鼓形表面,可自动纠正胶带的运行。
The head and tail pulley are drum-shaped surface,
which can automatically correct the alignment of the
belt;
头部滚筒面由可更换的摩擦衬片组成,维修更换方便。
The head pulley at the top is made up of segmented
friction lining, which is convenient for repair and
replacement;
笼型结构的尾部滚筒,避免了物料堆积。
The tail pulley is cage structure, which prevents material from piling up;
料斗与胶带之间有成型的橡胶垫板,在料斗绕过头尾滚筒时起缓冲作用。
Rubber pads placed between the buckets and the belt as cushion when the buckets pass the head and tail
pulleys;
料斗与胶带的固定采用带钉的碟形螺栓和碟形垫圈,以避免紧固螺栓的转动。
The fixing of buckets and the belt is done by tapered fasteners fixed to a small base plate with a butterfly
shaped washer, which prevents the fasteners from moving
 
产品特点:

提升高度大:可提升至 150m。
Elevating altitude: up to 150 meters
提升能力大:最大可达 1300t/h。
Elevating capacity: up to 1300 t/h
料斗排列紧凑,保证了连续受料和卸料。
Compact alignment of buckets, which ensures continuous material feeding and discharge;
可靠性高,运行成本相对较低。
High reliability and lower operation cost compared with chain elevators.
链式提升机
公司 NB 系列斗式提升机主要用于垂直提升散状物料,主要分为:NBC 型、NBS 型和 NBH 型三种型式。
SINOMA-TCDRI NB bucket elevators are mainly used for vertical transportation of bulk materials. They are
categorized into three types: NBC type, NBS type and NBH type.
NBC 型:适合以中低速提升石灰石、熟料等;
NBC bucket elevator: suitable for elevating limestone and clinker at a medium to low speed;
NBS 型:适合以低速提升粉状物料和小颗粒状物料;
NBS bucket elevator: suitable for elevating granulated material or powder at a low speed;
NBH 型(NBH-C):由 NBS 发展的一种高速斗式提升机,由于运行速度高,在提升能力相同时,可采用比
NBS 型小的提升机,非常经济。
NBH (NBH-C) bucket elevator: high speed bucket elevators developed from NBS bucket elevators; due to increased elevation speed, at same capacity, compared with NBS bucket elevators, this type of bucket elevator is smaller size and thus is a more economic choice.
 
 
链式输送机
链式输送机(拉链机),是一种输送粉状、粒状物料,运行水平或倾斜角小于 15°的机械产品,已广泛用于水泥、
建材、冶金、化工、电力、粮食加工等行业。
A chain conveyor is used for horizontal or inclined (within 15°) transport of powdery and granulated materials.
It has been widely used in industries such as cement, building materials, metallurgy, chemical processing, power generation and food processing.
 
产品优点
产品设计合理,体积小,输送能力大,使用寿命长,运转可靠,节能高效,维修方便。
Well-developed design, compact layout, high conveying capacity, long service life, reliable operation,
energy efficiency and easy maintenance.
 
 
 
斗式输送机
NAB 链斗输送机:适用于磨损性强、块状物料。具备了斗式提升机的特点同时又可以像刮板机一样复杂的输送
路线。
NAB type Elevator: suitable for conveying strong abrasiveness and lumpy material, it has the same characteristic with

NB type elevator, however, it will provide the complicated conveying route like scraper conveyor.
 
结构特点:

由于是料斗的形式、适用于化工行业可以输送磨损性大的块状物料
It is suitable for conveying strong abrasiveness and lumpy material in Chemical Industry.
既可以水平→垂直(倾斜)、又可以水平→垂直(倾斜)→水平的输送路线
The conveying route can be: From Horizonal to Vertical, From Horizonal to Vertical then to Horizonal.
运行时杂音小、比较安静满足环保对噪音的要求。
The noise is much lower, it will satisfy the requirements from Environmental Protection.
壳体是密闭构造,再加上斗子形式。不会向外漏料。
The structure of casing is airtight type, together with the bucket type, the material will not leak.
特殊的料斗构造、可以实现自动回收壳体底部余留物料。
The special type of bucket can realize automatic collecting of material accumulated in the bottom.
“Z”字形输送线路
“Z”Type conveying route
PB (PA) 中枢料斗输送机:料斗连续连接, 可多点排料。
PBPACentral System Bucket Elevatorbucket is connected continuously, the elevator can discharge from multiple point.
 
产品特点:

容器式搬送避免破碎
It will avoid material broken because of the Container type conveying
连续式料斗搭配防止飞散装置避免溢料
It will avoid material leaking because of the continuous bucket connecting type.
配回收设备避免物料残留
Equipped with recycling device to avoid material remaining.
中枢料斗多点卸料
Central System Bucket, discharging material from multiple point.